WELCOME TO NM3E's RF Wattmeter Pages!
Coaxial Dynamics authorized dealer
Stocking new and used CDI and Bird® items.
COPYRIGHT 2003-2018 NM3E.COM, LLC
(email gets a faster response) My phone # is 610-207-4865>>>email is best
Email questions to firstname.lastname@example.org (NOT my Paypal email)
Every Item is tested and guaranteed NOT DOA = it will arrive Working
CLICK THE LINKS BELOW TO FIND WHAT YOU NEED
If the page looks the same after clicking a link please scroll down
METER RELATED ITEMS:
Prices shown do NOT include shipping.
ALL Content on these pages including Photos are the property of NM3E.com, LLC (copyright 2003-2017)
Mounting a meter movement in a 43-----
The current mounting is:
The meter ring is attached directly to the cabinet with 2 screws, no spacers
OLDER Bird 43 had:
3 rubber bumpers to stand off and shock mount the movement from the front of the case (foam 1)
and a rubber ring between the movements and the meter ring (foam 2)
The foam for both the rear and front shock mounting can vary depending on
43 / meter ring / meter movement so I don't stock the foam.
The rubber bumpers are no longer made or sold.
The DC Cable = cable connecting the meter to the line section
Should be attached to the meter movement as:
BOTTOM NUT (this should never be loosened OR REMOVED)
There should always be a “BOTTOM NUT” on the meter movement it keeps the inner wiring in place. If you remove it the meter will have a very high chance of being damaged internally.